Resources

Now that we covered designing heat exchangers, specifically designing the baffles and plenums, the next step is to export your design for either simulation or printing. You can find our next course on this topic here. 

Additional Resources on Heat Exchanger Basics 

1. Video Example: Performance-Driven Heat Exchanger (~25min)
2. Video Example: Designing Heat Exchangers for Additive Manufacturing (~38min)
3. Article: Old to New Latticing Workflows: Blending Gyroids & TPMS Structures for Heat Exchanges
4. Article: Reshaping Plumbing Geometry – A Practical Example
5. Article: Designing the Optimal Heat Exchanger