Optional: FE Volume Mesh Test Problem

Now that you have learned ways to create an FE volume mesh in nTop, feel free to try this optional problem with a review of the answer in the following lesson.

Given the final mesh from the previous optional test problem, create an FE Volume Mesh with an Edge Length of 1mm and Quadratic Order. You can download the answer from the original test problem below as the starter file for this problem.

Estimated Time to Complete: 15 minutes

Example File:

102_22_Starter — Volume Mesh Test Problem.ntop

Report File Issue

This file was last updated in nTop 5.20.2

Previous Lesson

Back to Course

Next Lesson